The flexible stem is the feature you care for
The Depth Charge Flexible Electro Probe combines a smooth electro egg tip with a firm-yet-flexible silicone stem and an insulated acetal handle. That flexibility is what lets you angle the tip toward G-spot, A-spot or prostate areas, but it also means the stem and its internal wiring deserve gentle handling. The probe is bi-polar and takes two 2mm pin connectors from an ElectraStim stimulator, which is sold separately.
This guide covers the practical care points the product information supports: how to bend the probe without stressing it, what to clean and what to avoid, and how to store it so the contacts and stem stay in good shape between sessions.
Depth Charge specifications that affect care
- Depth Charge Flexible Electro Probe: Materials: laminated construction with aluminium contacts and a central acrylic isolator; flexible silicone stem and acetal handle. Different materials need different cleaning approaches: silicone is tolerant, while the aluminium contacts and acrylic isolator should not be soaked or scrubbed aggressively.

Depth Charge Flexible Electro Probe - Depth Charge Flexible Electro Probe: Insertable length 177mm / 7 inches; diameter 27mm / 1 inch; circumference 85mm / 3.35 inches. A longer insertable length means more surface to clean and dry thoroughly after each session.
- Depth Charge Flexible Electro Probe: Bi-polar for internal stimulation, takes 2x 2mm pin connectors. The two connection points at the base are the parts most vulnerable to water and debris, so they need attention during cleaning.
- Depth Charge Flexible Electro Probe: Requires a stimulator unit to provide the electro-sensations (sold separately). Cleaning and storage can be done without a stimulator, but you cannot test the probe's function until it is connected to a compatible ElectraStim unit.
How to bend the Depth Charge without damaging it
- Bend gradually, not sharply: The stem is described as firm-yet-flexible, so it will hold a curve. Work the bend along the length of the stem with your hands rather than forcing a tight angle at one point.
- Keep bends away from the handle joint: The acetal handle and the point where the stem meets it are rigid. Flex the silicone section, not the connection.
- Check the curve before insertion: Once bent, look along the probe to confirm the tip is angled as you intended. A smooth curve is easier to insert than a kinked one.
- Do not use the bend to apply leverage: The flexible stem gives you control over angle, but it is not designed as a lever. Twist, turn and thrust with the handle rather than pushing sideways on the tip.
Cleaning the probe: what the materials tell you
The supplied product information does not include a step-by-step cleaning procedure, so treat the following as material-appropriate guidance rather than a manufacturer instruction. The insertable section is a smooth electro egg with aluminium contacts and a central acrylic isolator, mounted on a flexible silicone stem. Silicone and aluminium are the surfaces you will clean most often.
Warm water and a mild toy cleaner are a sensible default for the silicone and aluminium surfaces. Avoid soaking the handle or the 2mm connection points, and do not put the probe in a dishwasher. After cleaning, dry the probe thoroughly, paying particular attention to the seam where the stem meets the handle and the two pin sockets. Moisture left in the sockets can interfere with the connection next time.
For the aluminium contacts, a soft cloth is enough. Do not use abrasive pads or solvents, which can scratch the contact surface or dull the acrylic isolator. If you use a spray cleaner, apply it to a cloth first rather than spraying directly into the connectors.
Storage that protects the stem and contacts
- Keep the curve relaxed: Store the probe straight or with a gentle curve. A tight bend held for months can stress the stem and internal wiring.
- Protect the 2mm sockets: Dust and lint in the pin sockets cause poor connections. A small pouch or the original packaging keeps them clean.
- Separate from other toys: Silicone can react with some softer materials over time. Store the Depth Charge apart from other toys, especially those made from jelly or TPE.
- Keep it dry and out of direct sun: Store in a cool, dry place. Sunlight and heat are not kind to silicone or acrylic over the long term.
Before and after each session: a quick check
Before you connect the probe, inspect the silicone stem for nicks or tears and check that the aluminium contacts are clean and dry. Apply plenty of water-based lubricant before use, as the product information recommends, to make insertion easier and improve sensation. Connect the two 2mm pins firmly to your ElectraStim stimulator before switching on.
After the session, disconnect the pins, clean and dry the probe as described above, and store it with a relaxed curve. The insulated handle makes the Depth Charge safe for anal use, but that safety depends on the handle and connections staying intact, so replace the probe if you see damage to the stem, handle or contacts.

