Before you begin: what you need
The Jack Socket is an electro stroker, not a standalone toy. It requires an ElectraStim stimulator (or another e-stim device with a 2mm connection) to create the pulsating sensations. Before your first session, gather your stimulator, the Jack Socket, the included conductive gel, and a water-based lubricant (a sample is included).
The Jack Socket comes in two sizes: Standard and XL. Both sleeves fit inside the same black silicone outer casing, but they have different internal textures and orifice diameters. Choose the size that matches your girth for the most comfortable experience.
Jack Socket specifications at a glance
- ElectraStim Jack Socket E-Stim Stroker: Standard Orifice minimum diameter: 25mm (1”), maximum diameter: 40mm (1.6”). XL Orifice minimum diameter: 37mm (1.45"), maximum diameter: 48mm (1.9"). These measurements help you choose between Standard and XL based on your penis girth.
ElectraStim Jack Socket E-Stim Stroker - ElectraStim Jack Socket E-Stim Stroker: Connection: 2mm. Adapters are available for 4mm systems. Ensures compatibility with your stimulator; most ElectraStim units use 2mm pins.
- ElectraStim Jack Socket E-Stim Stroker: Includes 60ml conductive gel and lube sample. You have the essentials for your first session right in the box.
Setting up your Jack Socket for the first time
Follow these steps to prepare the stroker and connect it to your stimulator.
- Choose your sleeve: Select the Standard or XL sleeve based on your girth. The Standard sleeve has a raised bumps texture for intense contact, while the XL sleeve has an indented ribs texture that produces a subtle suction sensation.
- Insert the sleeve into the case: Both sleeves fit inside the same black silicone outer casing. Make sure the sleeve is seated properly and the conductive rubber inserts are in place.
- Apply conductive gel: Apply a generous amount of the included conductive gel to the inside of the sleeve and to your penis. This ensures good electrical contact and enhances sensation.
- Connect the stimulator: Plug the 2mm pins from your ElectraStim stimulator into the 2mm inputs on the Jack Socket's flexible case. If your stimulator uses 4mm connections, use adapters (available separately).
- Add water-based lube: Apply a water-based lubricant to the sleeve and yourself to reduce friction and intensify pleasure. Avoid silicone-based lubes as they may damage the TPE sleeve.
- Start low and adjust: Turn on your stimulator at the lowest setting and gradually increase intensity to a comfortable level. Use the squeezable outer case to adjust pressure during use.
Making the most of your first session
The Jack Socket is designed to be squeezed and relaxed during use. Grip the outer case and vary the pressure to change the sensation. The realistic TPE sleeve and conductive gel work together to deliver a unique electro-stroking experience.
Remember to use plenty of water-based lube throughout your session. Reapply conductive gel if you notice the sensation weakening. Keep the stimulator intensity low until you are familiar with the feeling, and never exceed your comfort level.
Cleaning and storage
After use, remove the sleeve from the case and clean both parts with warm water and a mild soap or toy cleaner. The TPE sleeve is porous, so dry it thoroughly before storing. Do not boil or put the sleeve in a dishwasher. Store the Jack Socket in a cool, dry place away from direct sunlight. Replacement sleeves are available separately if needed.
