Press Stud Adapter Kit: Connecting Multiple Electrodes
By ElectraStim- Electro Sex Products- Official Store | Published: 2026-10-17
Category: Buying Guides
Learn how the ElectraStim Press Stud Adapter Kit lets you connect multiple electrodes to one stimulator, with clear fit guidance and trade-offs.
Quick answer
If you want to use multiple electrodes with your ElectraStim stimulator but the connectors don't match, the Press Stud Adapter Kit (2-pack) converts 2mm pins to 4mm press studs. This allows you to connect a wider range of electro sex toys without buying a new cable.
Why you might need an adapter
ElectraStim stimulators typically use 2mm pin connectors, but many popular electrodes and toys use 4mm press studs. Without an adapter, you're limited to only ElectraStim-branded electrodes. The Press Stud Adapter Kit bridges that gap, letting you experiment with third-party or specialty electrodes that use the larger press stud format.
How the adapter works
Each adapter in the 2-pack fits onto your existing ElectraStim cable, transforming the 2mm pins into 4mm press studs. This is a simple plug-and-play solution: no soldering, no cutting, and no permanent modification to your cable. You can swap adapters between sessions or keep one on each cable you own.
What to consider before buying
The adapter adds a small connection point, which may slightly increase resistance, though in practice this is negligible for most users. Also, because it's a mechanical adapter, it's not as seamless as a dedicated cable with the correct connector. If you plan to use press stud electrodes exclusively, a dedicated press stud cable might be a cleaner solution. But for occasional or mixed use, the adapter kit is far more versatile and cost-effective.
Decision rules
- Connector match: Check the connector type on your electrode. If it uses 4mm press studs and your stimulator cable uses 2mm pins, the adapter kit is required. Only buy the adapter if there is a connector mismatch.
- Number of channels: The kit includes 2 adapters, enough for a typical dual-channel stimulator. If you have a single-channel unit, you'll have a spare. One kit covers most setups.
- Permanent vs occasional use: If you use press stud electrodes every session, consider a dedicated press stud cable for a cleaner connection. For occasional or varied use, the adapter kit is more flexible. Choose based on your frequency of use.
Product facts
- Adapter Kit - Press Stud Connectors (2 Pack): Adapt your ElectraStim cable for use with other electro sex toys using this E-Stim Press Stud Adapter kit. If you’ve found a must-have electrode but it isn’t compatible with your ElectraStim stimulator then you’ll need an adapter kit to make it fit. This 2-pack of adapters fit onto your existing ElectraStim cable to transform the 2mm pins into 4mm press studs. This is the core solution for connecting non-ElectraStim electrodes that use 4mm press studs, giving you access to a broader range of toys.
- ElectraStim Recoil - Shape & Play Electrode: Recoil is a brand new addition to ElectraStim’s Shape & Play range – a unique unipolar electrode that bends, twists, and holds its shape until you change it. Designed for both external and internal play, Recoil puts creative control in your hands. Recoil uses 4mm press stud connectors, so you'll need the adapter kit to pair it with a standard ElectraStim cable. This combination allows custom-shaped play without buying a separate cable.
Who should buy this
Best for
- Users who want to try third-party or specialty electrodes with 4mm press studs
- Those who already own an ElectraStim stimulator and want to expand their electrode collection without replacing cables
Not for
- Users who only use ElectraStim-branded electrodes (no adapter needed)
- Those who prefer a single, dedicated press stud cable for a cleaner setup
