Start with the surfaces you can safely spray
Pjur Toy Cleaner Spray is a 100ml alcohol-free spray cleaner for sex toys. The supplied instructions say it is compatible with all toy materials and should be applied after every use to maintain the quality of your electro-sex accessories. The practical rule for e-stim gear is simple: spray the toy body, not the electrical parts.
That distinction matters because the same bottle covers very different surfaces. A stimulator housing, a conductive loop or a dildo can be sprayed and wiped. Cables, connection sockets and conductive pads need a more cautious approach, which the supplied guidance sets out separately.
A supported cleaning routine for e-stim toys
Follow these steps in order after each session. They reflect the supplied usage instructions for Pjur Toy Cleaner Spray and the supplied cautions for electro accessories.
- Disconnect and inspect first: Separate your toy from cables and the stimulator before cleaning. Check for residue around connection points so you know where to be careful.
- Spray the toy surface generously: Apply a generous spray over the surface of the toy, avoiding cables or connection sockets. A light spray also helps remove residue.
- Wipe with a dry or damp cloth: Wipe the sprayed surface with a dry or damp cloth. The cloth should be damp, not wet, so liquid does not run into openings or connectors.
- Wipe the stimulator via a cloth: The cleaner can be used to wipe down stimulators, but apply it to a cloth first rather than spraying directly onto the unit.
- Dry completely before storage: Make sure toys are completely dry before storing them. This is the final checkpoint in the supplied instructions.
Where the spray should not go
The supplied warnings are specific and worth treating as firm limits. Avoid spraying on any wires or connectors. The manufacturer also advises against using this spray, or any other liquid including water, to clean conductive pads because it may impair the adhesive.
That means your cleaning routine needs two zones. Spray-and-wipe applies to toy bodies and surfaces. Cables, connectors and conductive pads stay dry and are cleaned according to separate guidance rather than with this spray. If you are unsure whether a part is sealed or electrical, keep the spray off it and use a cloth instead.
Pjur Toy Cleaner Spray at a glance
- Pjur Toy Cleaner Spray- 100ml: 100ml alcohol-free spray cleaner, compatible with all toy materials. One bottle can cover mixed-material toy collections, and the alcohol-free formula matches the supplied ingredient list.
Pjur Toy Cleaner Spray- 100ml - Pjur Toy Cleaner Spray- 100ml: Apply after every use to maintain the quality of your electro-sex accessories. The routine is intended as after-session care, not an occasional deep clean.
- Pjur Toy Cleaner Spray- 100ml: Spray generously over the toy surface, avoid cables and connection sockets, then wipe with a dry or damp (not wet) cloth. This is the core method for toy bodies and the reason a cloth belongs in your cleaning kit.
- Pjur Toy Cleaner Spray- 100ml: For stimulators, apply the cleaner to a cloth first rather than spraying directly onto the unit. It keeps liquid away from controls and ports while still letting you wipe the housing.
Electro toy hygiene tips that follow the evidence
- Keep a dedicated cloth: A dry or damp cloth is part of the supplied method. Having one nearby makes the wipe step quick and keeps the spray off connectors.
- Treat pads as a separate category: Because the supplied guidance warns that liquid may impair the adhesive on conductive pads, do not include them in the spray-and-wipe step.
- Dry before storing: The instructions end with complete drying before storage. Build that pause into your routine rather than packing toys away damp.
- Use the spray after every session: The supplied guidance calls for application after every use, so consistency matters more than occasional heavy cleaning.
What this routine does not cover
The supplied information does not include a cleaning procedure for conductive pads beyond the warning to avoid liquids, and it does not describe cable cleaning. It also does not state a contact time, dilution ratio or replacement interval for the spray. Treat those as open questions rather than assuming a method.
For the parts you can spray, the sequence is clear: spray the toy surface, wipe with a dry or damp cloth, and let everything dry fully before storage. Keep cables, sockets and pads out of the spray path, and apply the cleaner to a cloth when wiping a stimulator. That is a complete, supported routine for Pjur Toy Cleaner Spray without extending it beyond what the product information confirms.
